Full Tridium Jace Configuration Manual (v1)

Whether you want to use the pre-configured station or not, you need a reference for configuring Jace gateways for DCH integration.

Overview

The JACE device is the standard Gateway/Controller to translate Modbus and BACnet data to MQTT and organise the data in DCH schema JSON format. This document will outline the steps required to integrate the entire network of sensors with DCH servers. The flow of this document is as follows:

Set up the JACE device to support the DCH JSON schema. This organises and translates sensor data to DCH-readable data.
Set up the JACE device to support MQTT drivers and two-way (publishing and subscribing) communication to and from Senaps.io.
Starting from end nodes, set up the connection between sensor nodes to the JACE device.

PreviousTime Bounded History Export via MQTT in the Tridium Jace NextStep 1: Setting up JSON Toolkit for JACE devices

Last updated 2 years ago

Full Tridium Jace Configuration Manual (v1)

Whether you want to use the pre-configured station or not, you need a reference for configuring Jace gateways for DCH integration.

Overview

Set up the JACE device to support the DCH JSON schema. This organises and translates sensor data to DCH-readable data.
Set up the JACE device to support MQTT drivers and two-way (publishing and subscribing) communication to and from Senaps.io.
Starting from end nodes, set up the connection between sensor nodes to the JACE device.

PreviousTime Bounded History Export via MQTT in the Tridium Jace NextStep 1: Setting up JSON Toolkit for JACE devices

Last updated 2 years ago